Big Neenah spout
price:
$
375
- In stock
- Ships in 2-3 days
This is a bronze spout with a very short projection. The edges have been rounded over and most of the sharp corners removed making this a nice part for use in a swimming pool.
Quick facts
- Size
- 5 in diameter back plate
- 3 ¼ in projection
- Material
- silicon bronze
- Plumbing
- 1 ½ in pipe size
- Arc length
- 9–16 in
- see the flow profile
Available finishes
Available in the standard bronze finishes with either a wax or epoxy coating. More about the finishes and coatings is on the bronze finishes page
More technical info
Details
- Part is made of silicon bronze
- It is designed to be used with 1½ in plumbing. The casting is threaded with 1½ in female NPT. A 1½ in male adapter is provided to screw into back of spout. If you have a piece of PVC pipe sticking out from the wall you could just glue the part in place.
- A bonding lug for #8 AWG wire is provided at the back. A set screw at bottom of back plate secures the wire.
- Decorative use only. More secure mounting options available but they are expensive and complicated to install—call to discuss.
- Not designed to be used with smaller plumbing. The nose has such a short projection that the smaller pipe diameters will create flows that look unnatural.
- Designed to be removable. Provided it's installed in a way that allows for this. Review the installation detail.
What's provided
- durable bronze casting
- threaded with 1½ in NPT
- two screw bosses with ¼-20 thread
- bonding lug for #8 AWG wire
- installation instructions
- PVC male adapter fitting
- hex wrench for bonding lug
- a lot of love ❤