Skip to content

LT Kepik spout

price: $ 452
  • In stock
  • Ships in 2-3 days
Kepik bronze fountain spout

The long throw kepik is a smaller bronze spout that projects a narrow pressurized strem of water. Use it when you need to clear the pool coping below or anytime your target lies a ways from the spout.

Quick facts

4 ¼ in × 4 ¼ in back plate
3 ½ in projection
silicon bronze
¾ in pipe size
Arc length
9–20 in
see the flow profile

Available finishes

Available in the standard bronze finishes with either a wax or epoxy coating. More about the finishes and coatings is on the bronze finishes page

Long throw Kepik fountain spout with traditional patina
Traditional patina with wax finish
Long throw Kepik fountain spout with light verdigris patina
Light verdigris patina and wax finish
Long throw Kepik fountain spout with heavy verdigris patina
Heavy verdigris patina with wax finish
Long throw Kepik fountain spout with Tuscan brown patina
Tuscan patina with wax finish
Long throw Kepik fountain spout with black patina
Black patina with wax finish
Basic dimensions of the Kepik spout 3 ½ 4 ¼
basic dimensions of the Kepik spout
Standard #300 can( 14 - 15 oz capacity )commonly used to canthing like kidney beans, fruits, diced tomatossome sauces 4 ½ 3 ½ 4 ¼ 3
Even professionals designers have a hard time getting a sense of how big an item is from dimensions. This should help


  • Part is made of silicon bronze
  • It is designed to be used with ¾ in plumbing. The casting is threaded with 1 in female NPT. A PVC bushing ( 1 in male NPT × ¾ in socket) is provided to screw into back of spout. If you have a piece of PVC pipe sticking out from the wall you could just glue the part in place.
  • A bonding lug for #8 AWG wire is provided at the back. A set screw at bottom of back plate secures the wire.
  • Decorative use only. More secure mounting options available but they are expensive and complicated to install—call to discuss.
  • This spout needs sufficient water pressure to work as designed. Most pump manufacturers provide a chart that graph pump head (pressure) in relation to water flow. Use this as a starting point to determine what will work in your installation.
  • Designed to be removable. Provided it's installed in a way that allows for this. Review the installation detail.

What's provided

back view of fountain spout
  1. durable bronze casting
  2. threaded with 1 in NPT
  3. two screw bosses with ¼-20 thread
  4. bonding lug for #8 AWG wire
  5. installation instructions
  6. PVC bushing fitting
  7. hex wrench for bonding lug
  8. a lot of love

Order a spout

We've got 12 spouts to sell.

Lead time for this item is 2-3 days, essentially the time it takes to apply the desired patina and finish

1 select a patina

2 Select a finish

about the patinas and finishes

view cart